Diagnostic code p0014 what does this mean?

What Does Code P0014 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. ... When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.

1. What causes exhaust camshaft position timing?
2. Can I still drive with a P0014 code?
3. How serious is P0014?
4. Can low oil cause P0014?
5. How much does it cost to fix a camshaft timing?
6. How do I know if my VVT solenoid is bad?
7. What does camshaft position Timing Over Advanced mean?
8. What is B camshaft position sensor?
9. What does engine code P1345 mean?
10. Where is the camshaft position actuator solenoid?
11. What is P0015 code mean?
12. What is P0012 code mean?

What causes exhaust camshaft position timing?

The camshaft's timing is incorrect. The valve control solenoid has failed and is stuck open. The valve control solenoid system's wiring is faulty or damaged. The oil flow to and from the camshaft phasers is restrictive.

Can I still drive with a P0014 code?

A faulty timing chain can cause serious engine damage. Continuing to drive your car can lead to further damage and a higher repair bill. Ideally, you want to drive to your nearest mechanic to get the problem looked at as soon as possible.

How serious is P0014?

What Does Code P0014 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. ... When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.

Can low oil cause P0014?

Due to how it's tied to oil pressure, the wrong oil level can also trigger the P0014 code. Checking your oil level is easy enough, but take precaution that low oil level hints at a potential leak.

How much does it cost to fix a camshaft timing?

To replace a camshaft position sensor, you can expect to pay anywhere from $95 to $200. Parts alone will run about $25 to $100. Labor costs will be in the range of $70 to $100 for professional replacement. Expect to pay more if you have a luxury vehicle or are having your local car dealership perform the replacement.

How do I know if my VVT solenoid is bad?

Common signs include a rough engine idle, the Check Engine Light coming on, and the engine stumbling when climbing hills or under load.

What does camshaft position Timing Over Advanced mean?

The P0011 DTC stands for “A” Camshaft Position Timing Over Advanced or System Performance Bank 1. The code indicates that the ECM/PCM has been unable to correct a detected difference in the desired camshaft position angle and the actual camshaft position angle.

What is B camshaft position sensor?

The camshaft position sensor notes the rate at which the camshaft is spinning, and helps the car's computer control things like fuel injection and engine timing. Note that the “B” means that this sensor is located in the exhaust side of the cylinder head.

What does engine code P1345 mean?

Receiving a P1345 code on your Chevy or GMC vehicle will read out as “Crankshaft Position-Camshaft Position Correlation”. While this error code can be caused by a faulty camshaft position sensor (CMP) or crankshaft position sensor (CPS), the issue a lot of the time relates to engine timing.

Where is the camshaft position actuator solenoid?

The Role of the Solenoids

A camshaft actuator solenoid --normally installed in the front of each cylinder head -- is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go.

What is P0015 code mean?

Diagnostic trouble code (DTC) P0015 stands for Exhaust “B” Camshaft Position Timing – Over – Retarded (Bank 1). This code involves your vehicle's camshaft timing, specifically your variable valve timing (VVT) also known as variable camshaft timing (VCT).

What is P0012 code mean?

The P0012 code is set when the ECM detects the camshaft timing for the intake camshaft on bank 1 is more retarded than what it has been set to be.