Do you need wide fingerboard trucks for 30mm decks?

1. What size fingerboard trucks should I get?
2. What is the best width for a fingerboard?
3. How wide is the average fingerboard?
4. What is the most common fingerboard size?
5. What is the difference between a tech deck and a fingerboard?
6. Do oak wheels fit on blackriver trucks?

What size fingerboard trucks should I get?

At the moment you can choose between 32mm and 34mm trucks, which one is best for your setup depends on the width of your deck. If your deck is 34mm wide or more go for the 34mm trucks, everything smaller than that go for the 32mm trucks.

What is the best width for a fingerboard?

The ideal size of a fingerboard is 3.5” – 5.0” in length and 2.0” – 3.0” in width. You will find most fingerboards in this size range in the market.

How wide is the average fingerboard?

A fingerboard is typically 100 millimeters (3.9 in) long with width ranging from 26 to 55 mm (1.0 to 2.2 in).

What is the most common fingerboard size?

Most prevalent is the modern 9.5” radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments. The next most common fingerboard radius, 7.25” (184mm), is a vintage-era spec now used on just under a third of Fender electric instruments.

What is the difference between a tech deck and a fingerboard?

But because of its high quality of standard, fingerboards are vastly different from Tech Deck's line of miniature skateboards. ... They are made of wood just like normal skate decks and glued together. The wheels have actual bearings in them and are made of urethane which actual skate wheels are made of.”

Do oak wheels fit on blackriver trucks?

The smooth, grippy and soft material gives Oak Wheels their famous 'mucho feeling'. ... Oak Wheels are specially designed to work with Blackriver Trucks and can also be used with Ytrucks.