- Can you sleeve a crankshaft?
- What is a seal sleeve?
- What is a Speedi sleeve?
- What is a wear sleeve?
- What is the longest lasting shaft sleeve material?
- Who makes national oil seals?
- How thick is a Speedi sleeve?
- What are speedi sleeves made of?
Can you sleeve a crankshaft?
These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. ... The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
What is a seal sleeve?
The most common type is a thin walled metal sleeve that slides onto a shaft and is placed over a worn or marred section of a shaft that a seal rides on. The wear sleeve covers the shaft imperfection and allows the end user to utilize the same shaft sized seal in the application.
What is a Speedi sleeve?
SPEEDI-SLEEVE® THE SPEEDI-SLEEVE® CONCEPT. the quickest and sensible way. to repair worn shafts. To seal efficiently, radial shaft seals must run against a smooth round surface - the seal counterface.
What is a wear sleeve?
A wear sleeve is a custom engineered “bushing” that is manufactured to ensure the proper running surface for your TRITEC seal. The wear sleeve protects your shaft from unnecessary wear and, therefore, is an economical alternative to expensive shaft materials and heat treatment.
What is the longest lasting shaft sleeve material?
Keystone Hard Iron Shaft Sleeve Benefits: Longer Lasting than Carbon Steel Shaft Sleeves. Longer Packing Life = Less Downtime. No Coatings, No Coating Delamination.
Who makes national oil seals?
SOUTHFIELD, Mich., Nov. 5, 2019 /PRNewswire/ -- National ® Oil Seals, a trusted brand from DRiV ™ for over 75 years, has launched an exclusive new application-specific hand install Red 375 Series seal with Dynamic Edge® technology for commercial vehicles.
How thick is a Speedi sleeve?
The sleeves are thin-walled (0,28 mm (0.011 in.)) and the contact surface is wear resistant and manufactured to minimize directionality (0° ±0,05) with a finish of Ra 0,25 to 0,5 µm (10 to 20 µin.). This is, in fact, a better counter- face than can often be achieved on a shaft.
What are speedi sleeves made of?
The new generation SKF Speedi-Sleeve uses a proprietary stainless steel material and manufacturing process, resulting in an optimized seal counterface surface that minimizes wear on both sleeve and sealing lip. The proprietary material provides increased strength and excellent ductility properties of the sleeve.