Vehicle position on the road should be considered by what?

1. When driving on the road you should always position your vehicle?
2. What is correct vehicle positioning?
3. Where should you drive on the road?
4. What are the 4 lane positions?
5. What lane position should a vehicle be in at the entrance to a left curve?
6. Where should a driver position their vehicle before turning left?
7. What is lane positioning?
8. Who should give way on a hill?
9. When should you use lane position 2?
10. What is lane Position 3 used for?
11. Which lane position should you be in if you are nearing the crest of a hill?
12. Which lane position should you be in as you prepare for a right turn *?
13. What is the best lane position for a motorcycle?
14. Which lane position LP is best for making a right turn?

When driving on the road you should always position your vehicle?

On your driving test you will need to keep a safe position at all times. In normal circumstances you should position your car in the centre of your half of the road - see image below. You should avoid driving too close to the kerb, as the road surface here is more uneven.

What is correct vehicle positioning?

Correct positioning means that you see further around the bend. Move out slightly on left-hand bends for an improved view. Hang back from large vehicles before overtaking so that you maximize your field of vision and can see further down the road to check for oncoming vehicles.

Where should you drive on the road?

You should always drive in the left-hand lane if the road ahead is clear.

What are the 4 lane positions?

Lane positions – there are five choices for lane position with in a lane: center, left, right and far left and far right.

What lane position should a vehicle be in at the entrance to a left curve?

Turn as little as possible.

As you approach a curve, move to the side of your lane opposite of the direction of the curve. For example, if the road curves to the left, move to the right side of your lane. As you continue through the curve, position your vehicle towards the other side of your lane.

Where should a driver position their vehicle before turning left?

Explanation: As you approach a left turn, maintain your normal driving position on the left. Don't swing out before you turn, and make sure that you've reduced your speed and are in the correct gear. Look into the road before you turn and give way to any pedestrians who are crossing.

What is lane positioning?

Lane position is the placement of your car in the center, on the right, or on the left of a lane. ... The average vehicle has a width of six feet, which gives you six feet to maneuver your vehicle within the lane.

Who should give way on a hill?

Always give way to the drivers coming uphill whenever it's possible. If needs be you should reverse until you reach a location where both vehicles have enough room to pass. It is also recommended by the highway code to slow down on a hill when passing pedestrians, cyclists or horse riders.

When should you use lane position 2?

Position number 1 is in the middle of the lane and will be used for most driving situations. Positions 2 and 3 are placements to the left and the right when restrictions to your path or view exist—without having to move out of the lane of travel.

What is lane Position 3 used for?

Position 3 is near the lane line to your right and is used when there is a restriction to your path of travel or line of sight and you cannot move out of the lane. The width of the lane allows drivers to make lane position adjustments to minimize risk and create more space between their car and problem situations.

Which lane position should you be in if you are nearing the crest of a hill?

Lane position 2 is recommended when approaching the crest of a hill. Intersections are the highest risk areas you will encounter when driving. It is illegal to pull into a shared left turn lane and wait for traffic to clear when executing a left turn from a driveway.

Which lane position should you be in as you prepare for a right turn *?

To make a right turn you should be in the lane furthest to the right. Signal your intent to turn by using the proper turn signal. You should signal at least three or four seconds, 100 feet, ahead of the turn. Look to your left and right to check the intersection for pedestrians and traffic.

What is the best lane position for a motorcycle?

The safest “default” lane position for a motorcycle is in the leftmost third of the lane. Most motorcyclists choose to stay in the left position for the majority of the time they're on the road. It offers good visibility and a flexible set of escape routes in an emergency.

Which lane position LP is best for making a right turn?

Lane position 3

As with lane position two, you should hold this position roughly three to six inches away from the right dividing line. You would assume lane position three when: Avoiding a hazard in the left part of the lane. Preparing to make a right turn.