What are the best wheels for mouse trap cars?

1. What is the best type of wheels for a mousetrap car?
2. What size wheels are best for a mousetrap car?
3. What can I use for wheels on a mousetrap car?
4. What makes a mousetrap car go farther?
5. What are the best materials for a mousetrap car?
6. What is the fastest mousetrap car?
7. What is the effect of using large or small wheels?
8. How long should the lever arm be on a mousetrap car for distance?
9. What is an axle hook on a mousetrap car?
10. Do larger wheels affect ride?
11. How far can a mousetrap car go?
12. How far did the world record mousetrap car go?
13. How do you increase the acceleration of a mousetrap car?
14. What simple machines are in a mousetrap car?
15. Should the string be tied to the axle Why or why not?

What is the best type of wheels for a mousetrap car?

Use thin, light wheels.

Thinner wheels have less friction and may go farther if the distance is what you want or need with your mousetrap racer. It's also important to take the weight of the wheels themselves into account — any unneeded weight will ultimately slow your car down or lead to added friction.

What size wheels are best for a mousetrap car?

The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.

What can I use for wheels on a mousetrap car?

Mouse Trap Cars: CD/DVD Wheels. Learn more about using DVDs/CDs as wheels on your mousetrap racer. DVDs/CDs make great wheels because they can slice through the air with very little resistance.

What makes a mousetrap car go farther?

What makes a mousetrap car go farther? ... Using large rear wheels allow one rotation of the axle to take the car a much further distance. In other words, a given length of the string from the mousetrap moves the car a greater distance. The last note is to place your mousetrap as close to the front of the car as possible.

What are the best materials for a mousetrap car?

A mousetrap car can be made from cardboard or balsa wood with CD's for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.

What is the fastest mousetrap car?

The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix's own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.

What is the effect of using large or small wheels?

If you choose bigger wheels, you will improve the stability of your car and the range of braking distance will be shortened; A larger diameter means that the wheel will be heavier and consequently speed will be slightly compromised during acceleration (depending also on the torque of the car);

How long should the lever arm be on a mousetrap car for distance?

For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be "just" long enough to reach the drive axle or performance will be compromised.

What is an axle hook on a mousetrap car?

An important part of a mousetrap vehicles propulsion system is the axle hook. ... If the string does not properly release from the drive axle the string will rewind around the drive axle and cause the mousetrap car to come to an instant stop.

Do larger wheels affect ride?

As a general rule, bigger wheels result in a rougher ride. Switching to a smaller wheel and a thicker tire can give you a smoother ride without any major modifications to your car. ... When changing the car's original wheels and tires, the general rule of thumb is that you can go up or down by one inch.

How far can a mousetrap car go?

The average distance the rattap car went was 18.6875ft and the average distance the mousetrap car went was 25.5ft.

How far did the world record mousetrap car go?

Description: The secret to Doc Fizzix's world record setting mousetrap distance racer that traveled over 182 meters was it's unique pulley system. This is the same pulley set-up that was used on Doc Fizzix's world record setting mousetrap distance car.

How do you increase the acceleration of a mousetrap car?

You always need to experiment to determine what the most functional design is. will be required to accelerate the car. In other words, you should match a larger axle with a smaller wheel to increase acceleration. Conversely, a mousetrap racer built for distance should have a smaller axle and a larger driving wheel.

What simple machines are in a mousetrap car?

Six Simple Machines

Inclined plane • Wedge • Screw • Lever • Wheel and axle • Pulley Your mousetrap vehicle will have a number of moving parts making it a type of machine.

Should the string be tied to the axle Why or why not?

To wind the string around the axle, the wheels are turned in the direction opposite to the motion of the vehicle's travel. It is important that the string NOT be wound loosely or it will snag itself as it is pulled from the axle by the lever arm, the string should carefully be wound tight and uniform around the axle.