What does edelbrock c355 manifold fit?

1. How much horsepower does an Edelbrock intake manifold add?
2. Is Edelbrock Performer a dual-plane intake?
3. Where are Edelbrock intake manifolds made?
4. What is Edelbrock known for?
5. Is a bigger intake manifold better?
6. How much HP do intake manifold add?
7. What's the difference between a single plane and a dual-plane intake manifold?
8. What is the difference between Edelbrock Performer and Performer RPM?
9. Is dual intake better than single?
10. Is Edelbrock still in business?
11. Is Edelbrock Made in USA?
12. Who is president of Edelbrock?
13. Does Edelbrock make good parts?
14. What size carburetor do I need for a 355?

How much horsepower does an Edelbrock intake manifold add?

With that the Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs.

Is Edelbrock Performer a dual-plane intake?

Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Where are Edelbrock intake manifolds made?

Final machining and packaging takes place at Edelbrock's facility in Torrance, California. Parts are placed on pallets and make trips to the location every day.

What is Edelbrock known for?

Founded in 1938, Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive aftermarket.

Is a bigger intake manifold better?

Intake Manifold Design

Larger-area runners will improve the flow at higher engine speeds, but may also slow the filling of the cylinders at lower engine speeds. ... The shape and size of the plenum should allow for proper pulse-reversion control and a good transition from the throttle body to the intake runners.

How much HP do intake manifold add?

Depending on your make, model, engine size, and type of intake, truck owners can expect an increase of between 5 and 15hp.

What's the difference between a single plane and a dual-plane intake manifold?

A dual-plane intake manifold has two separate plenums that each feed only four cylinders, while a single-plane intake manifold has a single, open plenum that feeds all eight cylinders. ... The smaller plenum found in a dual-plane intake, favors power production at a lower rpm range.

What is the difference between Edelbrock Performer and Performer RPM?

The Performer is designed for optimum performance in a lower rpm range than the Performer RPM. The RPM will deliver absolutely more horsepower but it will do so at high rpm's. If you are preparing a race car for open track and expect to be operating at WOT a lot then the RPM is for you.

Is dual intake better than single?

Choose a dual-plane intake for better idle quality, off-idle throttle tip-in response, and better air/fuel charge distribution to the cylinders at low rpm. Choose a dual-plane intake if you want longer runners to move the rpm band down.

Is Edelbrock still in business?

Edelbrock will be permanently closing its headquarters in Torrance, California, after being based in the state more than 80 years.

Is Edelbrock Made in USA?

Edelbrock's core product line of performance-enhancing engine, suspension, and exhaust system parts, which make up The Total Power Package, are manufactured in the USA.

Who is president of Edelbrock?

Don Barry. President/CEO, Edelbrock Corp.

Does Edelbrock make good parts?

As the manufacturer of carburetors, camshafts, cylinder heads, and more, Edelbrock has built a trusted reputation amongst classic car owners across the nation. There's a reason the company calls itself "the most respected name in performance."

What size carburetor do I need for a 355?

To arrive at the most appropriate carburetor choice, there's a basic formula: engine displacement multiplied by maximum rpm divided by 3,456. For example: a typical 355ci small-block—a 0.030-over rebuild—with a 6,000-rpm max engine speed would work well with a 616-cfm carb ((355 x 6,000) 3,456 = 616.32).