Diyvehiclerepair
- What happens if flywheel is on backwards?
- Can you put a flywheel on wrong?
- What happens when the flywheel goes?
- Will a bent flexplate cause vibration?
- Can you drive with a damaged flywheel?
- Can a flywheel damage a clutch?
- Can a flywheel damage a starter?
- What does a broken flexplate sound like?
- How much does it cost to replace a flexplate?
- What happens when a flexplate breaks?
- Can a bad flexplate cause a misfire?
- Can you drive with a bent flexplate?
- What does a loose flywheel sound like?
What happens if flywheel is on backwards?
Usually when a flexplate is installed backwards, the coverter will hit the face of the flexplate and not allow the convertor to bolt up ( to much space between the convertor tab and flexplate).
Can you put a flywheel on wrong?
Yes, it can be installed in the wrong position.
What happens when the flywheel goes?
If your flywheel is going bad, a smooth pedal is not what you will feel. ... The vibration tends to get stronger as you push on or engage the clutch pedal. 3, You Smell a Burnt Smell. A burning scent that is prominent as you shift in or out of gears can indicate both clutch problems and flywheel problems.
Will a bent flexplate cause vibration?
Feel for any unusual vibration that travels up through the chassis and into your driver's seat. The vibration will be heavy, although not quite as heavy as a failing U-joint. A warped flexplate causes a vibration through all speed ranges, especially if the flexplate has thrown a balance weight.
Can you drive with a damaged flywheel?
I wouldn't advise it. Generally 2 things can go wrong with a flywheel. Either stripped/broken ring gear teeth around the rim, or warped/cracked/out of balance. The stripped gear teeth can leave you stranded when starter can't engage it to crank the engine over.
Can a flywheel damage a clutch?
In many cases, a faulty flywheel will cause the clutch friction disc to wear out early. If the flywheel is not spinning smoothly or is causing jerky gear changes, this can damage the clutch plate, leading eventually to a slipping clutch.
Can a flywheel damage a starter?
Inspect the flywheel – over time the flywheel can become cracked, worn or even lose its teeth, impacting efficient engagement with the pinion gear on the starter motor. If you continue to force the starter motor to work with a broken flywheel, it will quickly diminish the lifespan of the part.
What does a broken flexplate sound like?
A loose bolt on a flexplate or a crack between it's bolt holes; can result in a knocking or rattling sound. The sound is very similar to a bad connecting rod and is often, misdiagnosed.
How much does it cost to replace a flexplate?
Based on all these factors, you can get your flexplate under $100 or for a couple of hundred dollars. Combine all of the factors mentioned above, and you safely total a cost of around $1200-$1500 to replace your flexplate.
What happens when a flexplate breaks?
When a flexplate cracks, it often produces a loud knocking noise as it rotates. The sound is very similar to a bad engine rod and is often misdiagnosed. Removing the bolts to the torque converter and sliding it back into the transmission will often reveal the real problem.
Can a bad flexplate cause a misfire?
A bent flexplate can cause an erratic crank sensor signal and cause a misfire.
Can you drive with a bent flexplate?
Can you drive a car with a warped flywheel? You can, but it will almost certainly damage the engine or transmission starting with the rear main engine seal or transmission input shaft seal.. , Car enthusiast, driving enthusiastically since 1979.
What does a loose flywheel sound like?
Loose flywheel or flexplate bolts make a rattling or knocking sound that changes with engine speed. It's heard behind the engine, where it mounts to the transmission bellhousing. ... If there's a rattling or knocking sound after an engine has been removed and replaced, the flywheel or flexplate bolts may be loose.
