What type of obd connector is in 1998 Nissan sentra?

1. Do 1998 cars have OBD2?
2. Is Nissan Sentra OBD2 compliant?
3. Where is the OBD port in a Nissan Sentra?
4. Is 1997 OBD1 or OBD2?
5. How do I know if I have OBD1 or OBD2?
6. Does my car have OBD II?
7. What OBD port does my car have?
8. What is a OBD 2?
9. Are all OBD ports the same?
10. Are OBD scanners universal?
11. What year did OBD 2 start?

Do 1998 cars have OBD2?

All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995. ... Diesel vehicles were not required to be OBD II compliant until January 1, 2004.

Is Nissan Sentra OBD2 compliant?

Yes. The Nissan B14 Sentra and 200SX 1996 - 1999 are OBD2 compliant.

Where is the OBD port in a Nissan Sentra?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below). If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.

Is 1997 OBD1 or OBD2?

In the US all model year 1996 or newer must be OBDII by federal law. There were mid production changes on the '96's but they are all OBDII. Your car is a '97 it is OBDII.

How do I know if I have OBD1 or OBD2?

OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle. 2. OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Does my car have OBD II?

All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995. 2) There will be a note on a sticker or nameplate under the hood: "OBD II compliant".

What OBD port does my car have?

The OBD2 port location can vary depending on your car model. However, it is usually found within reach of the driver, underneath the steering wheel. Scroll down to see where the OBD2 port is located in your car! Additionally, you can also check the location of the OBD2 port in your car's manual.

What is a OBD 2?

OBD II is an acronym for On-Board Diagnostic II, the second generation of on-board self-diagnostic equipment requirements for light- and medium-duty California vehicles. ... If a problem or malfunction is detected, the OBD II system illuminates a warning light on the vehicle instrument panel to alert the driver.

Are all OBD ports the same?

As a result, in 1996 car manufacturers started to equip cars and trucks with an OBD-II port. Every system is mostly the same, but there are slight variations. These are known as protocols, and are specific to vehicle manufacturers.

Are OBD scanners universal?

OBD scanners are universal and will read generic fault codes. Some vehicles, however, use both generic and manufacturer-specific fault codes. Many of the manufacturer-specific codes may not be read by a basic universal type OBD scanner.

What year did OBD 2 start?

Does my car have OBD-II? All cars built since January 1, 1996 have OBD-II systems. Manufacturers started incorporating OBD-II in various models as early as 1994.