When inspecting a vehicle braking system which component could be checked for serviceability by measuring with a micrometer?

1. What checks should be done to an electrical measuring device before using it?
2. What is the smallest accurate measurement that can be made on an engineers rule in MM?
3. Which type of micrometer is used to measure the exact depth of holes?
4. What tools do you need to perform a disc brake inspection?
5. What precautionary measures should be observed when measuring voltage?
6. What is the instrument that is used to measure resistance?
7. What is determined while measuring a component?
8. What is the smallest accurate measurement that can be made with an instrument?
9. What is the smallest accurate measurement that can be made on a standard metric?
10. What are micrometers used for?
11. What is measured using a micrometer?
12. How do you read a depth micrometer in inches?
13. Which of the following components does a disc brake system use?
14. When inspecting the brake assembly you should ensure quizlet?
15. What are the measuring tools used to identify the problems of brake system components?

What checks should be done to an electrical measuring device before using it?

Before you take a measurement with your multimeter, you should visually inspect it first. Check the meter, test probes and accessories over for signs of physical damage.

What is the smallest accurate measurement that can be made on an engineers rule in MM?

In general, a measuring device is considered accurate to the smallest graduation. So a steel rule that is graduated to 1/64" is accurate to about 0.015". But with careful visual interpolation, you actually measure to about 0.005" with a good steel rule.

Which type of micrometer is used to measure the exact depth of holes?

A depth micrometer is a sensitive tool that is used to measure the depth of small holes and bores. Used by engineers and mechanics, this device has a series of unique pieces that help it dial in an exact measurement. Reading depth micrometers is a precise science that must be performed carefully.

What tools do you need to perform a disc brake inspection?

used tools for brake service are your basic hand tools. Brake calipers are attached with hex-head bolts, Allen or Torx head bolts, and most other components use either standard or metric nuts and bolts.

What precautionary measures should be observed when measuring voltage?

Be mindful of the voltage you are measuring. When measuring AC voltage, for instance, do not allow the probe tips to touch one another when they are still connected to their respective point on the electrical circuit. This is to avoid shorting the circuit which can create a spark or ball of flame that can harm you.

What is the instrument that is used to measure resistance?

Resistance is measured using an instrument such as an analog multimeter or digital multimeter.

What is determined while measuring a component?

Explanation: Actual size is determined while measuring a component.

What is the smallest accurate measurement that can be made with an instrument?

The smallest value that can be measured by the measuring instrument is called its least count. Measured values are good only up to this value. The least count error is the error associated with the resolution of the instrument. A metre ruler may have graduations at 1 mm division scale spacing or interval.

What is the smallest accurate measurement that can be made on a standard metric?

Some micrometers are provided with a vernier scale on the sleeve in addition to the regular graduations. These permit measurements within 0.001 millimetre to be made on metric micrometers, or 0.0001 inches on inch-system micrometers.

What are micrometers used for?

Micrometers are specially designed for the measurement of very small objects. They allow for the highly precise measurement of any item that fits between the anvil and spindle. Standard types of micrometers can be used for the fine measurement of items under one inch in length, depth, and thickness.

What is measured using a micrometer?

micrometre. micrometre, also called micron, metric unit of measure for length equal to 0.001 mm, or about 0.000039 inch. Its symbol is μm. The micrometre is commonly employed to measure the thickness or diameter of microscopic objects, such as microorganisms and colloidal particles.

How do you read a depth micrometer in inches?

When reading a depth micrometer or inside caliper-type micrometer, the value shown on the main scale is the first number hidden by the thimble. In this example, the first number hidden by the thimble is 0.4 inches. The thimble scale aligns with the index line at 0.020 inches.

Which of the following components does a disc brake system use?

Rotors, calipers, and brake pads are primary components of the disc brake system.

When inspecting the brake assembly you should ensure quizlet?

When inspecting the break assembly, you sure ensure. The break shoes should have at lease quarter inch lining. At the end of every work day.

What are the measuring tools used to identify the problems of brake system components?

As for the brakes themselves, you'll need a micrometer or vernier calipers to measure brake pad and rotor thicknesses, as well as the rotor runout (wobble), flatness and parallelism.