Will the torque converter from a 360 be the same as a 318?

1. Are torque converters interchangeable?
2. Is a bigger torque converter better?
3. What size are the torque converter?
4. What size torque converter is in a 4L60E?
5. Are Turbo 350 and 400 torque converters the same?
6. Is a stall converter the same as a torque converter?
7. What is a good torque converter brand?
8. What does a bigger torque converter do?
9. Does a torque converter multiply torque?
10. Does a stall converter add horsepower?
11. How do I know what stall converter I have?
12. What is the stall speed of a stock torque converter?
13. What size stall is in a 4L60E?
14. Will a 700R4 torque converter fit a 4L60E?

Are torque converters interchangeable?

Q: Torque converter interchange

It is possible, but would have to be confirmed. Typically, there will be an alpha-numeric code, or a color designation, on the original converter(s). ... And, the best practice to ensure compatibility is to have YOUR torque converter rebuilt.

Is a bigger torque converter better?

Larger-diameter converters are usually more efficient and deliver less slippage, while smaller-diameter converters offer more stall speed and more slippage. Vehicle weight is another major factor that should be considered when selecting a converter.

What size are the torque converter?

Converters usually range from eleven to twelve inches in diameter all the way down the lowest, 7 inches. The smaller the torque converter you have, the lower amount of fluid that has to get pumped through it.

What size torque converter is in a 4L60E?

TORCO GM Chevy GMC Stock 12.5" Diameter 300mm Torque Converter 1998 up - 4L60 4L60E 4L65 4L65E - LS engine 4.8L 5.3L 6.0L - REMANUFACTURED.

Are Turbo 350 and 400 torque converters the same?

They are completely different transmissions. The Turbo 400 is larger, longer, and heavier than the Turbo 350 and was designed to live behind higher-torque applications such as big-blocks. ... If you're worried about the ultimate strength of the transmission, consult one of the transmission specialists for upgrades.

Is a stall converter the same as a torque converter?

A torque converter has three stages of operation: stall, acceleration, and coupling. Stall is when the transmission is in gear, but the brakes prevent the car from moving. ... As for stall speed, Greg Ducato, of Phoenix Transmission Products, explained that "a torque converter is like a clutch.

What is a good torque converter brand?

For our street driver, Street Hemi Coronet, we considered some of the great converter manufacturers like Turbo Action, ATI, Dynamic, Transmission Specialties, and TCI. We've used each one of these reputable companies' torque converters through the years without a single issue.

What does a bigger torque converter do?

A higher stall torque converter will let your car accelerate better because the car will be taking off at the rpm range where it is making the most power.

Does a torque converter multiply torque?

In a vehicle with an automatic transmission, the torque converter connects the power source to the load. ... This is a feature beyond that of the simple fluid coupling, which can match rotational speed but does not multiply torque and thus reduces power.

Does a stall converter add horsepower?

An automatic transmission in general has a way of soaking up horsepower, but the torque converter can take a potent combination and turn it into a pig when the rubber meets the road. ... And while stall speed is important for a good launch, it's also a place for horsepower to swirl down the drain.

How do I know what stall converter I have?

Watch your tach needle, you will see the needle jump to a certain rpm, that is “flash stall”. A drag racing-style trans brake will give you closer to the true stall speed of a torque converter.

What is the stall speed of a stock torque converter?

Stock torque converters generally have a stall speed around 1,800-2,000 rpm. Higher stall speeds become necessary when horsepower and torque happen at higher rpm ranges.

What size stall is in a 4L60E?

The Punisher Pro-Street is a high-performance 4L60E torque converter of the 10" size with an expected stall speed of 2600-2800 RPM.

Will a 700R4 torque converter fit a 4L60E?

Fits 200-R4, 700R4 and non-LS1 4L60E transmissions (1981-1997). This stall converter is balanced, has furnace brazed fins, bearing construction and a Sonnax carbon fiber clutch. ... All 4L60E transmissions through 1997 have the same 30 spline input shaft as 1984-1993 700R4 transmissions.